The ES-7 provides two channels of DC-coupled CV input to a connected ES-4, ES-40 or ES-6 module.
When used with an ES-4 or ES-40, the ES-7's inputs are provided on the ES-4's S/PDIF output jack. When used with an ES-6, the ES-7's inputs provide channels 7 & 8 of the ES-6's 8 channel lightpipe output.
Specifications
The ES-7's specifications are as follows:
- Panel width: 4HP
- Module depth: 50mm
- Digital I/O: connection from ES-4, ES-40 or ES-6 module
- Analogue inputs: 2x 3.5mm jacks, DC-coupled
- Input voltage range: ±10V
- Input impedance: 100kOhms
- A/D conversion: 24 bit, 103dB SNR typical
- Current draw: 35mA on the +12V rail, 17mA on the -12V rail
The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole). The power connector is a Doepfer standard 16 way IDC, with -12V furthest from the top of the board.
| depth | 50 |
| _hp | 4 |