Doepfer
Doepfer
$365.00
Features of the analog rows (knobs): 8 potentiometers (knobs) lower row: Scale (knob), voltage output range 0 ... ~ +6,5V upper row: 1V/2V/4V (octave range switch for exact VCO control), voltage output ranges 0...
Doepfer
$124.00
Module A-142-4 contains four simple envelope generators. The only time parameter is Decay and can be adjusted manuall by means of the Dec. control in the range 2 ms ... 2 seconds. The attack...
Doepfer
$148.00
A-135-2 is a miniature version of the A-135-1 . Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available....
Doepfer
$56.00
Module A-183-2 is a voltage offset generator combined with an attenuator/polarizer. This is how the A-183-2 works: At the two output sockets (simply two connected sockets) appears a DC voltage that is adjusted with...
Doepfer
$50.00
Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and...
Doepfer
$74.00
A-182-2 is a simple passive module that contains four changeover switches, which are used to connect or disconnect the sockets of the corresponding socket triplet: in the upper position of the switch the upper...
Doepfer
$62.00
Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has it's own buffer, i.e. the three...
Doepfer
$80.00
Module A-161 is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160). Eight outputs are sequentially switched by the clock signals from the A-160 (see Fig. 1) and can act,...
Doepfer
$124.00
Module A-160-2 is an enhanced version of the standard clock divider A-160 . The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses....
Doepfer
$74.00
Module A-151 (Quad Sequential Switch) is like an electronic four-position rotary switch. It includes trigger and reset inputs, four in / outputs, and a common out / input. Each time a pulse is received...
Doepfer
$68.00
Module A-150-1 (Dual VCS) contains two separate voltage-controlled switches. Each switch has a control voltage input, a common Out / Input, and two In / Outputs. The switches are bi-directional: they can work in...
Doepfer
$80.00
Module A-148 (Dual S&H) has two identical sample & hold modules, designed to produce 'staircase' voltages. The signal present at the sample input is sampled at a rate set by the signal at the...
Doepfer
$87.00
Module A-146 (LFO 2) is a Low Frequency Oscillator, which produces periodic control voltages over a wide range of frequencies. The LFO can be used as a modulation source for a series of modules...
Doepfer
$173.00
The module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor) behind a front panel with 8 HP only. Each ADSR provides these controls and in/outputs:...
Doepfer
$93.00
A-138s is a simple but useful 4-in-2 mixing tool. It has four inputs available. Each input is equipped with an attenuator (Level) and a panning control (Pan) which is used to distribute the signal...
Doepfer
$62.00
Module A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator with a linear response curve available. The...
Doepfer
$99.00
Module A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output. All...
Doepfer
$80.00
Module A-136 is a distortion and waveshaping module with extensive control possibilities. The incoming audio or cv signal is internally divided into 3 sections: positive component of the signal with adjustable clipping level (even...
Doepfer
$111.00
A-134-1 is a voltage controlled universal panning and/or crossfader module. If the module is used a voltage controlled Panning device one audio signal is panned to two different outputs. If the module is used...
Doepfer
$93.00
Modules A-130 and A-131 provide voltage-controlled amplification. For audio signals, you would normally use the exponential VCA (A-131), and for control voltages, the linear VCA (A-130). It doesn't always have to be that way,...
Doepfer
$99.00
The module is composed of two identical voltage controlled amplifiers (VCA). Each VCA has a manual gain control (also named Initial Gain) and a control voltage input with attenuator. The character of the control...
Doepfer
$87.00
Modules A-130 and A-131 provide voltage-controlled amplification. For audio signals, you would normally use the exponential VCA (A-131), and for control voltages, the linear VCA (A-130). It doesn't always have to be that way,...
Doepfer
$124.00
Module A-121-3 is functionally nearly identical to module A-121-2 . Only the distances between the controls and sockets are smaller and rubberized, small rotary knobs are used. Therefore the front panel width is only...
Doepfer
$136.00
Module A-120 is a voltage controlled low-pass filter, which filters out the higher parts of the sound spectrum, and lets lower frequencies pass through. The Cut-Off Frequency determines the point at which filtering takes...
Doepfer
$99.00
Module A-118-2 is the slim version of module A-118-1 and offers essentially the same features as the A-118-1 . But the distances between the controls are smaller and rubberized small-sized knobs are used. In...
Doepfer
$87.00
Module A-118 is (as you might have guessed) a noise and random voltage generator. It produces three types of signal: white noise, colored noise, and random voltage. The noise signal is generated 100% analog...
Doepfer
$87.00
Module A-116 provides voltage-controlled dynamic waveform modification of audio signals. It can produce new waveforms from the standard VCO shapes, and modulate these changes in real time. The signal first of all goes through...
Doepfer
$80.00
Module A-115 is a four-way frequency divider. The frequency of a signal at the input is halved (half frequency = first sub-octave), quartered (1/4 frequency = second sub-octave), and so on. In this way,...