We have run out of stock for this item.
Add yourself to our pre-request form to be notified when it's back in-stock!

The ESX-8GT is an expansion module for the ES-4, ES-40, ES-5 or FHX-8GT, adding 8 on/off outputs for use as gates, triggers, clocks etc. from one expansion header.

The ES-4/5 Controller software (part of Expert Sleepers Silent Way) also allows the ESX-8GT outputs to be used for DIN sync or MIDI output* (note - not just MIDI clock output, but as an actual MIDI port, capable of sending any MIDI messages). Since these outputs are driven from an audio connection, they have sample-accurate timing, which no USB MIDI interface can claim. See the accessories page for the necessary cables. Note there is also the ESX-8MD module, which is dedicated to MIDI and DINsync duties.

Specifications

The ESX-8GT's specifications are as follows:

  • Panel width: 4HP
  • Module depth: 24mm
  • Analogue outputs: 8x 3.5mm jacks, DC-coupled
  • Output voltages: 0V/5V
  • Indicators: illuminated jack sockets
  • Current draw: 20mA on the +12V rail, 0mA on the -12V rail

Power is supplied by the hosting ES-4/5/40 module, and is used for the LEDs only. I.e. with no LEDs lit, the current draw is 0mA.

The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole).

For more detail, please see the user manual.

Related products

View all
Expert Sleepers ES-5 mk3 Lightpipe/ADAT interface (Open Box)
Sale
Befaco Output V3 Audio Output (Assembled)
Befaco Instrument Interface Input Module (Assembled)
Expert Sleepers Little Mikey Mic and Instrument Preamp
Left Continue shopping
Your Order

You have no items in your cart